MACHINING / SIMULTANEOUS 5-AXIS
TAIKAN
V-400U
5-Axis Drilling & Milling Center
High-speed five-axis machining with a 24,000 rpm spindle.
Discuss your component All equipment
CONFIGURATION
At a glance.
- QUANTITY
- 4 units
- XYZ AXIS TRAVEL
- 700 × 450 × 400mm
- SPINDLE SPEED
- 24,000rpm
Quantities and configurations follow our factory equipment register. Part suitability depends on geometry, tooling and workholding, and is confirmed during drawing review.
MANUFACTURING PLANNING
A configuration.
A practical route.
Four V-400U machines complement our larger five-axis centers. Their 24,000 rpm spindles support process planning for detailed features and components requiring access from different tool orientations.
Simultaneous 5-axis machining
24,000 rpm spindle configuration
700 × 450 × 400 mm XYZ travel
RELATED MANUFACTURING EXPERIENCE
See the components.
Understand the process.
Explore representative factory projects. The machine and manufacturing route for a new part are selected during project review.
RF & Microwave Housing
Brass substrate | Gold-plated finish | 108 × 86 × 16 mm
A custom-machined cavity housing for RF and microwave assemblies, combining internal channels, thin partitions, locating features and threaded interfaces.
Complex 5-Axis Housing
ZL207 cast aluminium | Anodised with HVOF bore coating | Approx. Ø300 × 110 mm
A rotary engine housing combining a non-circular internal profile, thin cooling fins, end faces and intersecting holes.CONTINUE EXPLORING