PROJECT EXPERIENCE / SIX MANUFACTURING STORIES
The proof is in the part.
A closer look at real components, the requirements behind them and the manufacturing decisions that brought them to life.
MACHINING CASE / 01
RF & Microwave Housing
Brass substrate | Gold-plated finish | 108 × 86 × 16 mm
A custom-machined cavity housing for RF and microwave assemblies, combining internal channels, thin partitions, locating features and threaded interfaces.MACHINING CASE / 02
Precision Stepped Shaft
20CrMnTi alloy steel | Carbonitrided and ground | Approx. Ø35 × 260 mm
A custom camshaft with stepped journals, an eccentric cam section and threaded ends for an engine valve-timing application.MACHINING CASE / 03
Precision Face Gear
42CrMoV alloy steel | Carbonitrided and ground | Approx. Ø80 × 65 mm
A custom face gear for precision transmission and positioning assemblies, with radial face teeth and locating features.MACHINING CASE / 04
Thin-Wall Enclosure Cover
6061-T651 aluminium | Conductive conversion coating | 426 × 221 × 36 mm
A custom enclosure cover with ventilation-hole arrays, mounting holes and openings for electronic equipment.MACHINING CASE / 05
Complex 5-Axis Housing
ZL207 cast aluminium | Anodised with HVOF bore coating | Approx. Ø300 × 110 mm
A rotary engine housing combining a non-circular internal profile, thin cooling fins, end faces and intersecting holes.MACHINING CASE / 06
Custom Precision Parts
Aluminium, copper alloys and stainless steels | Finish specified per application
A selection of custom brackets, locating plates, clamping jaws, sleeves and shafts for varied equipment applications and small-batch production.